Gibson GCK95206XA Manual do Utilizador descarregar pdf (Página 23)

To install all the accessories, do the first step

in an opposite sequence.

Anti-tilt protection

Set the correct height and area for the

appliance before you attach the anti-tilt

protection.

CAUTION!

Make sure you install the anti-tilt

protection at the correct height.

Make sure that the surface behind

the appliance is smooth.

You must install the anti-tilt protection. If you

do not install it, the appliance can tilt.

Your appliance has the symbol shown on the

picture (if applicable) to remind you about the

installation of the anti-tilt protection.

1. Install the anti-tilt protection 275 - 280 mm

down from the top surface of the

appliance and 126 - 130 mm from the side

of the appliance into the circular hole on a

bracket. Screw it into the solid material or

use applicable reinforcement (wall).

126-130

mm

275- 280

mm

2. You can find the hole on the left side at

the back of the appliance. Lift the front of

the appliance and put it in the middle of

the space between the cupboards. If the

space between the bench cupboards is

larger than the width of the appliance, you

must adjust the side measurement to

centre the appliance.

If you changed the dimensions of

the cooker, you must align the non-

tip device correctly.

CAUTION!

If the space between the bench

cupboards is larger than the width

of the appliance, you must adjust

the side measurement to the

centre of the appliance.

Electrical installation

WARNING!

The manufacturer is not

responsible if you do not follow the

safety precautions from Safety

chapters.

This appliance is supplied with a main plug

and a main cable.

23

1 2 ... 18 19 20 21 22 23 24 25 26 27 28

Comentários a estes Manuais

Sem comentários